Featured Manufacturer, Greeting Cards

Lighthouse Card Using Creek Bank Creations stamps & dies

Today I am making a lighthouse card with the Lighthouse stamp set and slim stitched rectangle dies by Creek Bank Creations. The dies caught my eye first because they are considerably longer than a standard A2-sized card. In fact, these stitched rectangle dies accommodate cards created to fit inside a regular #10 business envelope! And the long lighthouse stamp set fits perfectly!
You can purchase the lighthouse stamp and slim-stitched rectangle die set HERE:
Creek Bank Creations Lighthouse Stamp Set
Creek Bank Creations Slim Stitched Rectangle Die Set

Watch the a video of the complete process:

I quickly realized that in order to use the LARGEST slim stitched rectangle die to create my card base (the dies measure approximately 9” x 3.75” down to 6.5” x 1.25”) , I would need my Sizzix Extended Platform and my Sizzix Extended Cutting Pads. The “regular” sized platform and pads included with the Sizzix Big Shot would not be large enough to accommodate the largest slim stitched rectangle die, but they would work just fine for all the other nesting slim stitched dies.

Using a stamping platform works great on this stamp set because it is so large. I use the Tim Holtz Stamping Platform, and I love it! I also used Spectrum Noir Alcohol Markers for coloring. Here is a breakdown of my color choices for this project:
Reds: CR8, CR11, DR7, CR7;
Light Gray Accents: IG1;
Lighthouse Top: IG10;
Balcony/Gate: EB2;
House Bottom: EB2, GB8;
Roof: TN7, TN8, EB2;
Sun: CT3, EB2, OR1;
Water: TB2, TB1, BT1;
Stone: IG1, IG4, IG5, IG2;
Grass: LG3, CG2, LG5, GT2, BT1.

For my stamping ink, I used Memento Tuxedo Black Ink for the lighthouse and Ranger Archival ink in Coffee for the sentiment. I used Stampin’ Up! ink in So Saffron to stamp a nautical background image on a piece of So Saffron cardstock for a background for my sentiment. Then, I die cut the sentiment and the yellow background with a scalloped oval die from my stash and mounted it up with some dimensional fun foam, using my Scotch  Advanced Tape Glider.
I realized that I had a white gap at the bottom of the image, so I hand-tied a triple bow with some ribbon from my stash, wrapped a small piece of ribbon around the white cardstock, and secured it in the back with 2 ZOTS Adhesive Dots. Then, I adhered the bow to the front with another ZOTS Adhesive Dots

I added some Ranger Distress Ink along the sides of the card and some Nuvo Crystal Drops in Simply White for finishing touches.

As a special thank you for visiting the blog today, feel free to use Sandpaper Road’s affiliate links for discount prices on craft products used in this project!

Sizzix Big Shot Starter Kit – Inspired by David Tutera – Machine, Cutting Pads, Multipurpose Platform, Paper, Stamps and Dies – 26 Piece Set Amazon’s Choice!

Sizzix – Big Shot Pro Machine Only with Standard Accessories – White and Gray – $299.99
Retail Price: $350.00
You Save: $50.01
from: Scrapbook.com

Sizzix – Adapter Pad, Extended – For Big Shot Pro Machine Only – $26.99
Retail Price: $30.00
You Save: $3.01
from: Scrapbook.com

Sizzix – Big Shot Pro Accessory – Cutting Pad – Extended, 1 Pair – $53.99
Retail Price: $60.00
You Save: $6.01
from: Scrapbook.com

Tim Holtz Stamping Platform

Tsukineko Memento Dye Ink Pad – Tuxedo Black – $4.76

Retail Price: $5.29
You Save: $0.53
from: Blitsy

Nuvo Crystal Drops

Tim Holtz Distress Ink Pad – Vintage Photo – $5.39

Retail Price: $5.99
You Save: $0.60
from: Blitsy

Archival Ink Pad #0 – Coffee – $5.39
Retail Price: $5.99
You Save: $0.60
from: Blitsy

ZOTS Adhesive Dots

Darice 106-118 40/Pack Foam Sheets, 6 by 9-Inch, Assorted

3M Scotch Advanced Tape Glider & Tape – Pink – $24.29
Retail Price: $26.99
You Save: $2.70
from: Blitsy

Spectrum Noir Alcohol Markers – Reds – Pack of 6 – $10.79
Retail Price: $11.99
You Save: $1.20
from: Blitsy

Spectrum Noir Alcohol Markers – Blues – Pack of 6 – $10.79
Retail Price: $11.99
You Save: $1.20
from: Blitsy

Spectrum Noir Alcohol Markers – Greens – Pack of 6 – $10.79
Retail Price: $11.99
You Save: $1.20
from: Blitsy

Spectrum Noir Alcohol Markers – Cool Grays – Pack of 6 – $10.79
Retail Price: $11.99
You Save: $1.20
from: Blitsy

Spectrum Noir Alcohol Markers – Essentials – Pack of 6 – $10.79
Retail Price: $11.99
You Save: $1.20
from: Blitsy

Spectrum Noir Alcohol Markers – Browns – Pack of 6 – $10.79
Retail Price: $11.99
You Save: $1.20
from: Blitsy

Featured Manufacturer, Greeting Cards

Best Wishes Card Using Products from Ranger Ink (Wendy Vecchi)/Stampers Anonymous

FEATURED MANUFACTURER: Ranger Ink (Wendy Vecchi)/Stampers Anonymous


This 5″ x 7″ card was created using products by Ranger Ink (featuring Wendy Vecchi’s Studio 490 “Stamp-it-Stencil-it” set, Circle Collage background stamp and Crackled Texture Paste; Tim Holtz’s Distress Oxide Inks, Distress Spray Stain, Distress Ink and Distress Stickles and “Festive” stencil; and Dyan Reaveley’s Dylusions Ink Spray and “Curious Corrin” stamp set).

1. First, I created a background using 4 colors of Distress Oxide (Worn Lipstick, Iced Spruce, Broken China and Fossilized Amber) by smearing Oxide ink directly on my craft mat, spritzing with water, and tapping my paper into the wet ink. I dried each layer with a heat gun. AS I WAS DRYING, I spritzed the paper with water to achieve the oxidized look I wanted. Then, I stamped the “Curious Corrin” stamp and the “eyes” stamp directly onto the background with the Iced Spruce Oxide Ink to add interest. I also stamped directly onto the background using Fossilized Amber Distress Oxide Ink with Wendy Vecchi’s Circle Collage Background Stamp, as well.


This was also the time when I stamped the sentiment using Wendy Vecchi’s stamp (included with the Stamp-it-Stencil-it “Select-a-Sentiment”) using regular Distress Ink in Black Soot. I used the same black ink and a Ranger blending tool to stencil “best wishes” right into the “window area”. All the sentiments included in the stencil wheel fit perfectly into the window of the stamp.1.Wendy.Vecchi.card.top.left.with.logo

Watch Wendy Vecchi herself demonstrating the Stamp-it-Stencil-it at the April 2017 Adventures in Stamping Convention (Akron, OH):

2. Next, I used Wendy Vecchi’s Studio 490 Crackled Texture Paste and Tim Holtz’s Festive stencil to add dimension and texture to the card. This texture paste dries with a nice matte finish.


3. While the paste was drying, I created an embellishment piece using the “pointing hand” stamp (also from the Curious Corrin set). I used Wendy Vecchi’s Archival Ink in Fern Green to stamp the hand several times on regular white cardstock. Then, I smeared Oxide ink on my craft mat (Fossilized Amber, Iced Spruce and Worn Lipstick). With a water brush, I picked up some of the ink and colored in the hand, letting some of the water leak out to activate the Oxide ink. I fussy-cut the hands, punched a hole in the center, added a square brad from my personal stash and coated the top of the brad with Distress Stickles in Pumice Stone. While I had the Stickles, I decided to add a few dots to the swirl of the black sentiment stamp, too.


4. Final touches! I wanted to tone down the background a bit, so I used Dylusions Ink Spray in White Linen over the areas where I had stenciled with texture paste. The moisture of the spray ink reacted with the oxide ink again, but didn’t bleach out my background. I used the same Ranger Ink Blending tool and the Black Soot Distress Ink to VERY LIGHTLY graze over the texture paste (just to make the stenciled images “pop” a little). Then, I used Distress Spray Stain in Iced Spruce to spray a touch on the top and bottom of the card. Finally, I adhered the “hand” embellishment with a few dots of Ranger Glossy Accents.

Thanks for looking!

PRODUCT LIST (click images to view details):

Distress Ink Black Soot
Distress Oxide Fossilized Amber
Distress Oxide Broken China
Distress Oxide Iced Spruce
Distress Oxide Worn Lipstick
Archival Ink Fern Green
Dylusions Ink Spray White Linen
Distress Spray Stain Iced Spruce

Dylusions Curious Corrin set
Studio 490 Wendy Vecchi Circle Collage Background Stamp
Studio 490 Wendy Vecchi Select-a-Sentiment Stamp-it-Stencil-it!

Tim Holtz Festive

Studio 490 Wendy Vecchi Crackled Texture Paste
Tim Holtz Distress Stickles Pumice Stone
Ranger Glossy Accents

square brad (personal stash)

This post contains affiliate links. Items not pictured are available for purchase at stampersanonymous.com

Greeting Cards

EASY DIY Baby Card or Birth Announcement using Papertrey Ink “Onesie Die”

Papercraft like a PRO using the “Onesie” die from Papertrey Ink! It’s QUICK and EASY! Watch the complete video tutorial here:


1. Start with 1 sheet 8.5″ x 11″ colored cardstock and 1 sheet 8.5″ x 11″ white cardstock. Cut the colored cardstock in half, lengthwise. Then fold ONE of the colored halves in half to make an A2-sized, top-folding greeting card base (4.25″ x 5.5″). Set aside.



2. Cut ONE “Onesie” die cut shape from the remaining half of the colored cardstock. Set aside. Also cut ONE “Onesie” die cut shape from the white cardstock. Emboss this white die-cut shape as desired with an embossing folder. If desired, ink the outside edges of the white die-cut shape with a coordinating “baby-colored” ink of your choice. Then, with scissors or a paper trimmer, cut out a strip of the die-cut shape across the “chest” of the onesie (about 1/2″ or 3/4″ wide, depending on your preference). Locate the colored die-cut onesie shape from earlier. Adhere the 2 pieces of white onesie die-cut to the colored die-cut onesie shape, lining up the edges of the white onesie with the edges of the colored onesie. Set aside.



3. Use the remaining white cardstock to stamp a sentiment for the front of the card and another sentiment for the inside of the card. These examples show stamps and ink from Stampin’ Up!. Die cut the sentiments as desired. These examples show scalloped circle dies from Spellbinders and stitched rectangle dies from Whitelotous. Set aside sentiments. Wrap a flat strip of ribbon around the onesie piece and secure on the back with adhesive. Use another piece of ribbon to tie around that first ribbon strip in the front, OR create a bow and then adhere with a glue dot to the first ribbon strip. Adhere the front sentiment to the onesie shape with dimensional adhesive. Set aside.


4. Locate the colored A2-sized top-folding card from step one. Carefully line up the folded top of the card with the dotted line on the die. Die cut the entire card. Test and make sure the die cut folded card stays intact when it opens and closes.


5. Place adhesive on the die-cut folded card front. Adhere the decorated full-sized onesie card panel to the front of the folded die-cut onesie-shaped card, lining everything up at the bottom edges. Adhere remaining stamped sentiment on the inside of the card as desired.



Imagine using this same technique to make congratulations baby cards, shower invitations, shower gift thank you cards, infant baptism/christening cards, or even happy “birth”day cards! This die is also perfect for use in a scrapbook baby album! Use as a tag, use for journaling, or even use to frame a small photo!


Please note that at the time of this posting, I am not in any way affiliated with Papertrey Ink. I just really like this die! You can purchase this die from Papertrey Ink here: https://www.papertreyink.com/index.php?p=catalog&mode=search&search_str=onesie+die


If you enjoyed this post, please LIKE and SHARE with your crafty friends! Don’t forget to click “FOLLOW” to be the first to know when Sandpaper Road posts something new on the blog! Thank you!